Graybyt3 Was Here

Linux host2053.hostmonster.com 4.19.286-203.ELK.el7.x86_64 #1 SMP Wed Jun 14 04:33:55 CDT 2023 x86_64
Apache
67.20.112.170

dovecot.conf

## Dovecot configuration file

# NOTICE FOR CPANEL SYSTEMS
# On cPanel servers this file is generated by combining a
# template at /var/cpanel/templates/dovecot/main.default
# and a datastore at /var/cpanel/conf/dovecot/main
#
# The template may be customized by making a copy of it at
# /var/cpanel/templates/dovecot/main.local
# similar to the way in which httpd.conf can be customized
#
# Direct edits of the rendered dovecot.conf file will not
# be preserved when dovecot is updated.  Use the
# "Mailserver Configuration" interface in WebHostManager instead.

# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration

# "doveconf -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting files when posting to the Dovecot mailing list.

# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace  "

# Most (but not all) settings can be overridden by different protocols and/or
# source/destination IPs by placing the settings inside sections, for example:
# protocol imap { }, local 127.0.0.1 { }, remote 10.0.0.0/8 { }

# Default values are shown for each setting, it's not required to uncomment
# those. These are exceptions to this though: No sections (e.g. namespace {})
# or plugin settings are added by default, they're listed only as examples.
# Paths are also just examples with the real defaults being based on configure
# options. The paths listed here are for configure --prefix=/usr
# --sysconfdir=/etc --localstatedir=/var

# Base directory where to store runtime data.
#base_dir = /var/run/dovecot

# Protocols we want to be serving: imap pop3
# If you only want to use dovecot-auth, you can set this to "none".
protocols = lmtp imap pop3

# A comma separated list of IPs or hosts where to listen in for connections.
# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
# If you want to specify non-default ports or anything more complex,
# edit conf.d/master.conf.
#listen = *, ::

# Should all IMAP and POP3 processes be killed when Dovecot master process
# shuts down. Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is eg. because of a security fix). This however
# means that after master process has died, the client processes can't write
# to log files anymore.
#shutdown_clients = yes

verbose_proctitle = yes

# SSL DH parameters
# Generate new params with `openssl dhparam -out /etc/dovecot/dh.pem 4096`
# Or migrate from old ssl-parameters.dat file with the command dovecot
# gives on startup when ssl_dh is unset.
ssl_dh = </etc/dovecot/dh.pem

# SSL & SNI hosts
!include_try /etc/dovecot/ssl.conf
!include_try /etc/dovecot/sni.conf

##
## Login processes
##

# Name of this instance. In multi-instance setup doveadm and other commands
# can use -i <instance_name> to select which instance is used (an alternative
# to -c <config_path>). The instance name is also added to Dovecot processes
# in ps output.
#instance_name = dovecot

# Greeting message for clients.
#login_greeting = Dovecot ready.

# Space separated list of trusted network ranges. Connections from these
# IPs are allowed to override their IP addresses and ports (for logging and
# for authentication checks). disable_plaintext_auth is also ignored for
# these networks. Typically you'd specify your IMAP proxy servers here.
#login_trusted_networks =

# Space separated list of login access check sockets (e.g. tcpwrap)
#login_access_sockets =

# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
# proxying. This isn't necessary normally, but may be useful if the destination
# IP is e.g. a load balancer's IP.
#auth_proxy_self =

##
## Mailbox locations and namespaces
##

# Location for users' mailboxes. The default is empty, which means that Dovecot
# tries to find the mailboxes automatically. This won't work if the user
# doesn't yet have any mail, so you should explicitly tell Dovecot the full
# location.
#
# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
# kept. This is called the "root mail directory", and it must be the first
# path given in the mail_location setting.
#
# There are a few special variables you can use, eg.:
#
#   %u - username
#   %n - user part in user@domain, same as %u if there's no domain
#   %d - domain part in user@domain, empty if there's no domain
#   %h - home directory
#
# See doc/wiki/Variables.txt for full list. Some examples:
#
#   mail_location = maildir:~/Maildir
#   mail_location = mbox:~/mail:INBOX=/var/mail/%u
#   mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
#
# <doc/wiki/MailLocation.txt>
#

#mail_location =

namespace inbox {
   type = private

# Hierarchy separator to use. You should use the same separator for all
   # namespaces or some clients get confused. '/' is usually a good one.
   # The default however depends on the underlying mail storage format.
   separator = .

# Prefix required to access this namespace. This needs to be different for
   # all namespaces. For example "Public/".
   prefix = INBOX.

# Physical location of the mailbox. This is in same format as
   # mail_location, which is also the default for it.
   #location =

# There can be only one INBOX, and this setting defines which namespace
   # has it.
   inbox = yes

# If namespace is hidden, it's not advertised to clients via NAMESPACE
   # extension. You'll most likely also want to set list=no. This is mostly
   # useful when converting from another server with different namespaces which
   # you want to deprecate but still keep working. For example you can create
   # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
   #hidden = yes

# Show the mailboxes under this namespace with LIST command. This makes the
   # namespace visible for clients that don't support NAMESPACE extension.
   # "children" value lists child mailboxes, but hides the namespace prefix.
   #list = yes

# Namespace handles its own subscriptions. If set to "no", the parent
   # namespace handles them (empty prefix should always have this as "yes")
   #subscriptions = yes
   #subscriptions = yes

mailbox Drafts {
    special_use = \Drafts
    auto = subscribe
  }

mailbox spam {
    special_use = \Junk
    auto = subscribe
  }

mailbox Trash {
    special_use = \Trash
    auto = subscribe
  }

mailbox Sent {
    special_use = \Sent
    auto = subscribe
  }

mailbox "Sent Messages" {
    special_use = \Sent
    auto = no
  }

mailbox Archive {
    special_use = \Archive
    auto = create
  }

mailbox "Archives" {
    special_use = \Archive
    auto = no
  }
}

# Example shared namespace configuration
#namespace {
  #type = shared
  #separator = /

# Mailboxes are visible under "shared/user@domain/"
  # %%n, %%d and %%u are expanded to the destination user.
  #prefix = shared/%%u/

# Mail location for other users' mailboxes. Note that %variables and ~/
  # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
  # destination user's data.
  #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u

# Use the default namespace for saving subscriptions.
  #subscriptions = no

# List the shared/ namespace only if there are visible shared mailboxes.
  #list = children
#}
# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"?
#mail_shared_explicit_inbox = no

# System user and group used to access mails. If you use multiple, userdb
# can override these by returning uid or gid fields. You can use either numbers
# or names. <doc/wiki/UserIds.txt>
#mail_uid =
#mail_gid =

# Group to enable temporarily for privileged operations. Currently this is
# used only with INBOX when either its initial creation or dotlocking fails.
# Typically this is set to "mail" to give access to /var/mail.
#mail_privileged_group =

# Grant access to these supplementary groups for mail processes. Typically
# these are used to set up access to shared mailboxes. Note that it may be
# dangerous to set these if users can create symlinks (e.g. if "mail" group is
# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
#mail_access_groups =

# Allow full filesystem access to clients. There's no access checks other than
# what the operating system does for the active UID/GID. It works with both
# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
# or ~user/.
#mail_full_filesystem_access = no

# Dictionary for key=value mailbox attributes. This is used for example by
# URLAUTH and METADATA extensions.
#mail_attribute_dict =

# A comment or note that is associated with the server. This value is
# accessible for authenticated users through the IMAP METADATA server
# entry "/shared/comment".
#mail_server_comment = ""

# Indicates a method for contacting the server administrator. According to
# RFC 5464, this value MUST be a URI (e.g., a mailto: or tel: URL), but that
# is currently not enforced. Use for example mailto:admin@example.com. This
# value is accessible for authenticated users through the IMAP METADATA server
# entry "/shared/admin".
#mail_server_admin =

##
## Mail processes
##

# Don't use mmap() at all. This is required if you store indexes to shared
# filesystems (NFS or clustered filesystem).
#mmap_disable = no

# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
# since version 3, so this should be safe to use nowadays by default.
#dotlock_use_excl = yes

# When to use fsync() or fdatasync() calls:
#   optimized (default): Whenever necessary to avoid losing important data
#   always: Useful with e.g. NFS when write()s are delayed
#   never: Never use it (best performance, but crashes can lose data)
#mail_fsync = optimized

# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches
# whenever needed. If you're using only a single mail server this isn't needed.
#mail_nfs_storage = no

# Mail index files also exist in NFS. Setting this to yes requires
# mmap_disable=yes and fsync_disable=no.
#mail_nfs_index = no

# Locking method for index files. Alternatives are fcntl, flock and dotlock.
# Dotlocking uses some tricks which may create more disk I/O than other locking
# methods. NFS users: flock doesn't work, remember to change mmap_disable.
#lock_method = fcntl

# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
verbose_proctitle = yes

# Directory where mails can be temporarily stored. Usually it's used only for
# mails larger than >= 128 kB. It's used by various parts of Dovecot, for
# example LDA/LMTP while delivering large mails or zlib plugin for keeping
# uncompressed mails.
#mail_temp_dir = /tmp

# Valid UID range for users, defaults to 500 and above. This is mostly
# to make sure that users can't log in as daemons or other system users.
# Note that denying root logins is hardcoded to dovecot binary and can't
# be done even if first_valid_uid is set to 0.
first_valid_uid = 201
#last_valid_uid = 0

# Valid GID range for users, defaults to non-root/wheel. Users having
# non-valid GID as primary group ID aren't allowed to log in. If user
# belongs to supplementary groups with non-valid GIDs, those groups are
# not set.
#first_valid_gid = 1
#last_valid_gid = 0

# Maximum allowed length for mail keyword name. It's only forced when trying
# to create new keywords.
#mail_max_keyword_length = 50

# ':' separated list of directories under which chrooting is allowed for mail
# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
# This setting doesn't affect login_chroot, mail_chroot or auth chroot
# settings. If this setting is empty, "/./" in home dirs are ignored.
# WARNING: Never add directories here which local users can modify, that
# may lead to root exploit. Usually this should be done only if you don't
# allow shell access for users. <doc/wiki/Chrooting.txt>
#valid_chroot_dirs =

# Default chroot directory for mail processes. This can be overridden for
# specific users in user database by giving /./ in user's home directory
# (eg. /home/./user chroots into /home). Note that usually there is no real
# need to do chrooting, Dovecot doesn't allow users to access files outside
# their mail directory anyway. If your home directories are prefixed with
# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
#mail_chroot =

# UNIX socket path to master authentication server to find users.
# This is used by imap (for shared users) and lda.
#auth_socket_path = /var/run/dovecot/auth-userdb

# Directory where to look up mail plugins.
#mail_plugin_dir = /usr/lib/dovecot

# Space separated list of plugins to load for all services. Plugins specific to
# IMAP, LDA, etc. are added to this list in their own .conf files.
# Quota support must be enabled globally for the quota-status
# service to work
mail_plugins = quota quota_clone zlib

##
## Mailbox handling optimizations
##

# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are
# also required for IMAP NOTIFY extension to be enabled.
mailbox_list_index = yes

# Trust mailbox list index to be up-to-date. This reduces disk I/O at the cost
# of potentially returning out-of-date results after e.g. server crashes.
# The results will be automatically fixed once the folders are opened.
#mailbox_list_index_very_dirty_syncs = yes

# Should INBOX be kept up-to-date in the mailbox list index? By default it's
# not, because most of the mailbox accesses will open INBOX anyway.
#mailbox_list_index_include_inbox = no

# The minimum number of mails in a mailbox before updates are done to cache
# file. This allows optimizing Dovecot's behavior to do less disk writes at
# the cost of more disk reads.
#mail_cache_min_mail_count = 0

# When IDLE command is running, mailbox is checked once in a while to see if
# there are any new mails or other changes. This setting defines the minimum
# time to wait between those checks. Dovecot can also use inotify and
# kqueue to find out immediately when changes occur.
mailbox_idle_check_interval = 30 secs

# Save mails with CR+LF instead of plain LF. This makes sending those mails
# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
# But it also creates a bit more disk I/O which may just make it slower.
# Also note that if other software reads the mboxes/maildirs, they may handle
# the extra CRs wrong and cause problems.
#mail_save_crlf = no

# Max number of mails to keep open and prefetch to memory. This only works with
# some mailbox formats and/or operating systems.
mail_prefetch_count = 20

# How often to scan for stale temporary files and delete them (0 = never).
# These should exist only after Dovecot dies in the middle of saving mails.
#mail_temp_scan_interval = 1w

# How many slow mail accesses sorting can perform before it returns failure.
# With IMAP the reply is: NO [LIMIT] Requested sort would have taken too long.
# The untagged SORT reply is still returned, but it's likely not correct.
#mail_sort_max_read_count = 0

protocol !indexer-worker {
  # If folder vsize calculation requires opening more than this many mails from
  # disk (i.e. mail sizes aren't in cache already), return failure and finish
  # the calculation via indexer process. Disabled by default. This setting must
  # be 0 for indexer-worker processes.
  #mail_vsize_bg_after_count = 0
}

##
## Maildir-specific settings
##

# By default LIST command returns all entries in maildir beginning with a dot.
# Enabling this option makes Dovecot return only entries which are directories.
# This is done by stat()ing each entry, so it causes more disk I/O.
# (For systems setting struct dirent->d_type, this check is free and it's
# done always regardless of this setting)
#maildir_stat_dirs = no

# When copying a message, do it with hard links whenever possible. This makes
# the performance much better, and it's unlikely to have any side effects.
maildir_copy_with_hardlinks = yes

# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
# when its mtime changes unexpectedly or when we can't find the mail otherwise.
maildir_very_dirty_syncs = yes

# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
# getting the mail's physical size, except when recalculating Maildir++ quota.
# This can be useful in systems where a lot of the Maildir filenames have a
# broken size. The performance hit for enabling this is very small.
maildir_broken_filename_sizes = yes

# Always move mails from new/ directory to cur/, even when the \Recent flags
# aren't being reset.
#maildir_empty_new = no

##
## mdbox-specific settings
##

# Maximum dbox file size until it's rotated.
mdbox_rotate_size = 10M

# Maximum dbox file age until it's rotated. Typically in days. Day begins
# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.

# When creating new mdbox files, immediately preallocate their size to
# mdbox_rotate_size. This setting currently works only in Linux with some
# filesystems (ext4, xfs).
#mdbox_preallocate_space = no

##
## IMAP specific settings
##

protocol imap {

# If nothing happens for this long while client is IDLEing, move the connection
  # to imap-hibernate process and close the old imap process. This saves memory,
  # because connections use very little memory in imap-hibernate process. The
  # downside is that recreating the imap process back uses some resources.

imap_hibernate_timeout = 30s

# Maximum IMAP command line length in bytes. Some clients generate very long
  # command lines with huge mailboxes, so you may need to raise this if you get
  # "Too long argument" or "IMAP command line too large" errors often.
  #imap_max_line_length = 65536

# Maximum number of IMAP connections allowed for a user from each IP address.
  # NOTE: The username is compared case-sensitively.
  mail_max_userip_connections = 20

# Space separated list of plugins to load (default is global mail_plugins).
  mail_plugins = acl quota imap_quota
  mail_plugins = $mail_plugins zlib imap_zlib quota_clone virtual  
  #mail_plugin_dir = /usr/lib/dovecot/imap

# IMAP logout format string:
  #  %i - total number of bytes read from client
  #  %o - total number of bytes sent to client
  #  %{fetch_hdr_count} - Number of mails with mail header data sent to client
  #  %{fetch_hdr_bytes} - Number of bytes with mail header data sent to client
  #  %{fetch_body_count} - Number of mails with mail body data sent to client
  #  %{fetch_body_bytes} - Number of bytes with mail body data sent to client
  #  %{deleted} - Number of mails where client added \Deleted flag
  #  %{expunged} - Number of mails that client expunged, which does not
  #                include automatically expunged mails
  #  %{autoexpunged} - Number of mails that were automatically expunged after
  #                    client disconnected
  #  %{trashed} - Number of mails that client copied/moved to the
  #               special_use=\Trash mailbox.
  #  %{appended} - Number of mails saved during the session
  imap_logout_format = in=%i out=%o deleted=%{deleted} expunged=%{expunged} trashed=%{trashed} hdr_count=%{fetch_hdr_count}

# Override the IMAP CAPABILITY response. If the value begins with '+',
  # add the given capabilities on top of the defaults (e.g. +XFOO XBAR).
  imap_capability = +NAMESPACE

# How many seconds to wait between "OK Still here" notifications when
  # client is IDLEing.
  imap_idle_notify_interval = 24 min

# ID field names and values to send to clients. Using * as the value makes
  # Dovecot use the default value. The following fields have default values
  # currently: name, version, os, os-version, support-url, support-email.
  #imap_id_send =

# ID fields sent by client to log. * means everything.
  #imap_id_log =

# Workarounds for various client bugs:
  #   delay-newmail:
  #     Send EXISTS/RECENT new mail notifications only when replying to NOOP
  #     and CHECK commands. Some clients ignore them otherwise, for example OSX
  #     Mail (<v2.1). Outlook Express breaks more badly though, without this it
  #     may show user "Message no longer in server" errors. Note that OE6 still
  #     breaks even with this workaround if synchronization is set to
  #     "Headers Only".
  #   tb-extra-mailbox-sep:
  #     Thunderbird gets somehow confused with LAYOUT=fs (mbox and dbox) and
  #     adds extra '/' suffixes to mailbox names. This option causes Dovecot to
  #     ignore the extra '/' instead of treating it as invalid mailbox name.
  #   tb-lsub-flags:
  #     Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g. mbox).
  #     This makes Thunderbird realize they aren't selectable and show them
  #     greyed out, instead of only later giving "not selectable" popup error.
  #
  # The list is space-separated.
  #imap_client_workarounds =

# Host allowed in URLAUTH URLs sent by client. "*" allows all.
  #imap_urlauth_host =

# Enable IMAP LITERAL- extension (replaces LITERAL+)
  #imap_literal_minus = no

# What happens when FETCH fails due to some internal error:
  #   disconnect-immediately:
  #     The FETCH is aborted immediately and the IMAP client is disconnected.
  #   disconnect-after:
  #     The FETCH runs for all the requested mails returning as much data as
  #     possible. The client is finally disconnected without a tagged reply.
  #   no-after:
  #     Same as disconnect-after, but tagged NO reply is sent instead of
  #     disconnecting the client. If the client attempts to FETCH the same failed
  #     mail more than once, the client is disconnected. This is to avoid clients
  #     from going into infinite loops trying to FETCH a broken mail.
  #imap_fetch_failure = disconnect-immediately

namespace spam {
      prefix = spam
     separator = .
    location = virtual:/usr/local/cpanel/etc/dovecot/virtual/spam:INDEX=~/mail/virtual/%u/spam
    list = no
    hidden = yes
  }

namespace sent {
      prefix = sent
     separator = .
    location = virtual:/usr/local/cpanel/etc/dovecot/virtual/sent:INDEX=~/mail/virtual/%u/sent
    list = no
    hidden = yes
  }

namespace inbox {
      mailbox Trash {
        autoexpunge = 30d
      }
  }

}

##
## POP3 specific settings
##

protocol pop3 {

# Don't try to set mails non-recent or seen with POP3 sessions. This is
  # mostly intended to reduce disk I/O. With maildir it doesn't move files
  # from new/ to cur/, with mbox it doesn't write Status-header.
  #pop3_no_flag_updates = no

# Support LAST command which exists in old POP3 specs, but has been removed
  # from new ones. Some clients still wish to use this though. Enabling this
  # makes RSET command clear all \Seen flags from messages.
  #pop3_enable_last = no

# If mail has X-UIDL header, use it as the mail's UIDL.
  #pop3_reuse_xuidl = no

# Allow only one POP3 session to run simultaneously for the same user.
  #pop3_lock_session =

# POP3 UIDL (unique mail identifier) format to use. You can use following
  # variables, along with the variable modifiers described in
  # doc/wiki/Variables.txt (e.g. %Uf for the filename in uppercase)
  #
  #  %v - Mailbox's IMAP UIDVALIDITY
  #  %u - Mail's IMAP UID
  #  %m - MD5 sum of the mailbox headers in hex (mbox only)
  #  %f - filename (maildir only)
  #
  # If you want UIDL compatibility with other POP3 servers, use:
  #  UW's ipop3d         : %08Xv%08Xu
  #  Courier             : %f or %v-%u (both might be used simultaneosly)
  #  Cyrus (<= 2.1.3)    : %u
  #  Cyrus (>= 2.1.4)    : %v.%u
  #  Dovecot v0.99.x     : %v.%u
  #  tpop3d              : %Mf
  #
  # Note that Outlook 2003 seems to have problems with %v.%u format which was
  # Dovecot's default, so if you're building a new server it would be a good
  # idea to change this. %08Xu%08Xv should be pretty fail-safe.
  #
  pop3_uidl_format = UID%u-%v

# Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes
  # won't change those UIDLs. Currently this works only with Maildir.
  #pop3_save_uidl = no

# What to do about duplicate UIDLs if they exist?
  #   allow: Show duplicates to clients.
  #   rename: Append a temporary -2, -3, etc. counter after the UIDL.
  #pop3_uidl_duplicates = allow

# This option changes POP3 behavior so that it's not possible to actually
  # delete mails via POP3, only hide them from future POP3 sessions. The mails
  # will still be counted towards user's quota until actually deleted via IMAP.
  # Use e.g. "$POP3Deleted" as the value (it will be visible as IMAP keyword).
  # Make sure you can legally archive mails before enabling this setting.
  #pop3_deleted_flag =

# POP3 requires message sizes to be listed as if they had CR+LF linefeeds.
  # Many POP3 servers violate this by returning the sizes with LF linefeeds,
  # because it's faster to get. When this setting is enabled, Dovecot still
  # tries to do the right thing first, but if that requires opening the
  # message, it fallbacks to the easier (but incorrect) size.
  #pop3_fast_size_lookups = no

# POP3 logout format string:
  #  %i - total number of bytes read from client
  #  %o - total number of bytes sent to client
  #  %t - number of TOP commands
  #  %p - number of bytes sent to client as a result of TOP command
  #  %r - number of RETR commands
  #  %b - number of bytes sent to client as a result of RETR command
  #  %d - number of deleted messages
  #  %{deleted_bytes} - number of bytes in deleted messages
  #  %m - number of messages (before deletion)
  #  %s - mailbox size in bytes (before deletion)
  #  %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly
  pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s, bytes=%i/%o

# Maximum number of POP3 connections allowed for a user from each IP address.
  # NOTE: The username is compared case-sensitively.
  mail_max_userip_connections = 20

# Space separated list of plugins to load (default is global mail_plugins).
  mail_plugins = quota

mail_plugins = $mail_plugins quota quota_clone virtual zlib

#mail_plugin_dir = /usr/lib/dovecot/pop3

# Workarounds for various client bugs:
  #   outlook-no-nuls:
  #     Outlook and Outlook Express hang if mails contain NUL characters.
  #     This setting replaces them with 0x80 character.
  #   oe-ns-eoh:
  #     Outlook Express and Netscape Mail breaks if end of headers-line is
  #     missing. This option simply sends it if it's missing.
  # The list is space-separated.
  #pop3_client_workarounds =

namespace spam {
      prefix = spam
     separator = .
    location = virtual:/usr/local/cpanel/etc/dovecot/virtual/spam:INDEX=~/mail/virtual/%u/spam
    list = no
    hidden = yes
  }

namespace sent {
      prefix = sent
     separator = .
    location = virtual:/usr/local/cpanel/etc/dovecot/virtual/sent:INDEX=~/mail/virtual/%u/sent
    list = no
    hidden = yes
  }

namespace inbox {
      mailbox Trash {
        autoexpunge = 30d
      }
  }

}

##
## LMTP specific settings
##

protocol lmtp {
    quota_full_tempfail = no
    # Address to use when sending rejection mails.
    # Default is postmaster@%d. %d expands to recipient domain.
    postmaster_address = root

mail_plugins = quota quota_clone zlib 
}

lmtp_save_to_detail_mailbox = yes
lmtp_user_concurrency_limit = 25

recipient_delimiter = +

# Support proxying to other LMTP/SMTP servers by performing passdb lookups.
#lmtp_proxy = no

# When recipient address includes the detail (e.g. user+detail), try to save
# the mail to the detail mailbox. See also recipient_delimiter and
# lda_mailbox_autocreate settings.
#lmtp_save_to_detail_mailbox = no

# Verify quota before replying to RCPT TO. This adds a small overhead.
lmtp_rcpt_check_quota = yes

# Which recipient address to use for Delivered-To: header and Received:
# header. The default is "final", which is the same as the one given to
# RCPT TO command. "original" uses the address given in RCPT TO's ORCPT
# parameter, "none" uses nothing. Note that "none" is currently always used
# when a mail has multiple recipients.
#lmtp_hdr_delivery_address = final

##
## LDA specific settings
##

protocol lda {
  quota_full_tempfail = no
  # Address to use when sending rejection mails.
  # Default is postmaster@%d. %d expands to recipient domain.
  postmaster_address = root

# Hostname to use in various parts of sent mails (e.g. in Message-Id) and
  # in LMTP replies. Default is the system's real hostname@domain.
  #hostname =

# Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  mail_plugins = quota quota_clone zlib 
  #mail_plugin_dir = /usr/lib/dovecot/lda

# Binary to use for sending mails.
  #sendmail_path = /usr/lib/sendmail

# If non-empty, send mails via this SMTP host[:port] instead of sendmail.
  #submission_host =

# Subject: header to use for rejection mails. You can use the same variables
  # as for rejection_reason below.
  #rejection_subject = Rejected: %s

# UNIX socket path to master authentication server to find users.
  #auth_socket_path = /var/run/dovecot/auth-master
}

# Should saving a mail to a nonexistent mailbox automatically create it?
lda_mailbox_autocreate = yes

# Should automatically created mailboxes be also automatically subscribed?
#lda_mailbox_autosubscribe = no

##
## Authentication processes
##

# Disable LOGIN command and all other plaintext authentications unless
# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
# matches the local IP (ie. you're connecting from the same computer), the
# connection is considered secure and plaintext authentication is allowed.
# See also ssl=required setting.
disable_plaintext_auth = no

# Auth cache settings

# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
auth_cache_size = 999M

# Time to live for cached data. After TTL expires the cached record is no
# longer used, *except* if the main database lookup returns internal failure.
# We also try to handle password changes automatically: If user's previous
# authentication was successful, but this one wasn't, the cache isn't used.
# For now this works only with plaintext authentication.
auth_cache_ttl = 3600 sec

# TTL for negative hits (user not found, password mismatch).
# 0 disables caching them completely.
auth_cache_negative_ttl = 3600 sec

# Space separated list of realms for SASL authentication mechanisms that need
# them. You can leave it empty if you don't want to support multiple realms.
# Many clients simply use the first one listed here, so keep the default realm
# first.
#auth_realms =

# Default realm/domain to use if none was specified. This is used for both
# SASL realms and appending @domain to username in plaintext logins.
#auth_default_realm =

# List of allowed characters in username. If the user-given username contains
# a character not listed in here, the login automatically fails. This is just
# an extra check to make sure user can't exploit any potential quote escaping
# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
# set this value to empty.
#Allow + in usernames
auth_username_chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!#$-=?^_{}~./@+%"

# Maximum number of dovecot-auth worker processes. They're used to execute
# blocking passdb and userdb queries (eg. MySQL and PAM). They're
# automatically created and destroyed as needed.
#auth_worker_max_count = 30

# Time to delay before replying to failed authentications.
#auth_failure_delay = 2 secs

# Space separated list of wanted authentication mechanisms:
#   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
#   gss-spnego
# NOTE: See also disable_plaintext_auth setting.
auth_mechanisms = plain login

passdb {
     driver = pam
     args = dovecot
     deny = yes
}

##
## Password and user databases
##

passdb {
  driver = dict
  args = /usr/local/cpanel/etc/dovecot/cpauthd-dict.conf
  result_internalfail = continue
  result_failure = return-fail
}

userdb {
   driver = prefetch
}
userdb {
  driver = dict
  args = /usr/local/cpanel/etc/dovecot/cpauthd-dict.conf
}

##
## Log destination.
##

# Log file to use for error messages. "syslog" logs to syslog,
# /dev/stderr logs to stderr.
#log_path = syslog

# Log file to use for informational messages. Defaults to log_path.
#info_log_path =
# Log file to use for debug messages. Defaults to info_log_path.
#debug_log_path =

# Syslog facility to use if you're logging to syslog. Usually if you don't
# want to use "mail", you'll use local0..local7. Also other standard
# facilities are supported.
#syslog_facility = mail

##
## Logging verbosity and debugging.
##

# Log unsuccessful authentication attempts and the reasons why they failed.
#auth_verbose = no

# In case of password mismatches, log the attempted password. Valid values are
# no, plain and sha1. sha1 can be useful for detecting brute force password
# attempts vs. user simply trying the same password over and over again.
# You can also truncate the value to n chars by appending ":n" (e.g. sha1:6).
#auth_verbose_passwords = no

# Even more verbose logging for debugging purposes. Shows for example SQL
# queries.
#auth_debug = no

# In case of password mismatches, log the passwords and used scheme so the
# problem can be debugged. Enabling this also enables auth_debug.
#auth_debug_passwords = no

# Enable mail process debugging. This can help you figure out why Dovecot
# isn't finding your mails.
#mail_debug = no

# Show protocol level SSL errors.
#verbose_ssl = no

# mail_log plugin provides more event logging for mail processes.
plugin {
  # Events to log. Also available: flag_change append
  #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename
  # Available fields: uid, box, msgid, from, subject, size, vsize, flags
  # size and vsize are available only for expunge and copy events.
  #mail_log_fields = uid box msgid size
}

##
## Log formatting.
##

# Prefix for each line written to log file. % codes are in strftime(3)
# format.
#log_timestamp = "%b %d %H:%M:%S "

# Space-separated list of elements we want to log. The elements which have
# a non-empty variable value are joined together to form a comma-separated
# string.
#login_log_format_elements = user=u> method=%m rip=%r lip=%l %c

# Login log format. %$ contains login_log_format_elements string, %s contains
# the data we want to log.
#login_log_format = %$: %s

# Log prefix for mail processes. See doc/wiki/Variables.txt for list of
# possible variables you can use.
#mail_log_prefix = "%s(%u)<%{pid}><%{session}>: "

# Format to use for logging mail deliveries:
#  %$ - Delivery status message (e.g. "saved to INBOX")
#  %m / %{msgid} - Message-ID
#  %s / %{subject} - Subject
#  %f / %{from} - From address
#  %p / %{size} - Physical size
#  %w / %{vsize} - Virtual size
#  %e / %{from_envelope} - MAIL FROM envelope
#  %{to_envelope} - RCPT TO envelope
#  %{delivery_time} - How many milliseconds it took to deliver the mail
#  %{session_time} - How long LMTP session took, not including delivery_time
#  %{storage_id} - Backend-specific ID for mail, e.g. Maildir filename
#deliver_log_format = msgid=%m: %$

##
## Services
##

service config {
    vsz_limit = 1024 M
}

service quota-status {
  executable = quota-status -p postfix
  unix_listener {
    path = quota-status
    mode = 0666
  }
}

service auth {
  unix_listener auth-client {
    path = auth-client
    mode = 0666
  }

}

service stats {
  
  unix_listener stats-writer {
    mode = 0666
  }
}

plugin {

zlib_save = gz
  zlib_save_level = 6

}

mail_access_groups = dovecot

service dict {
  unix_listener dict {
    mode = 0660
      group = dovecot
  }
}

# Disabled until we offically support Pigeonhole
#managesieve_notify_capability = mailto
#managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave

service lmtp {
# Set max. process size in megabytes. Most of the memory goes to mmap()ing
# files, so it shouldn't harm much even if this limit is set pretty high.
    vsz_limit = 512 M
    #process_min_avail =

#We always want this. Otherwise one connection could block another
    #connection that shares the same process.
    client_limit = 1

process_limit = 500

unix_listener lmtp {
       user = mailnull
       group = mail
       mode = 0660
    }
}

service imap-login {
# Maximum number of connections allowed per each login process. This setting
# is used only if login_process_per_connection=no. Once the limit is reached,
# the process notifies master so that it can create a new login process.
  client_limit = 500
# Maximum number of login processes to create. The listening process count
# usually stays at login_processes_count, but when multiple users start logging
# in at the same time more extra processes are created. To prevent fork-bombing
# we check only once in a second if new processes should be created - if all
# of them are used at the time, we double their amount until the limit set by
# this setting is reached.
    process_limit = 50
# Number of login processes to keep for listening new connections.
    process_min_avail = 5
# Should each login be processed in its own process (yes), or should one
# login process be allowed to process multiple connections (no)? Yes is more
# secure, espcially with SSL/TLS enabled. No is faster since there's no need
# to create processes all the time.
    service_count = 0
# Set max. process size in megabytes. If you don't use
# login_process_per_connection you might need to grow this.
    vsz_limit = 128 M
# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
    #drop_priv_before_exec =
# chroot login process to the login_dir. Only reason not to do this is if you
# wish to run the whole Dovecot without roots. <doc/wiki/Rootless.txt>
#chroot = yes
# User to use for the login process. Create a completely new user for this,
# and don't use it anywhere else. The user must also belong to a group where
# only it has access, it's used to control access for authentication process.
# Note that this user is NOT used to access mails. <doc/wiki/UserIds.txt>
#user = dovecot
# IP or host address where to listen in for non-SSL connections. Defaults
# to above if not specified.
    inet_listener imap {
      address = *
    }
# IP or host address where to listen in for SSL connections. Defaults
# to above if not specified.
    inet_listener imaps {
      address = *
    }
}

service imap {
# Maximum number of running mail processes. When this limit is reached,
# new users aren't allowed to log in.
    process_limit = 1024
# Set max. process size in megabytes. Most of the memory goes to mmap()ing
# files, so it shouldn't harm much even if this limit is set pretty high.
    vsz_limit = 512 M
# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
    #drop_priv_before_exec =

unix_listener imap-master {
    user = $default_internal_user
  }
  extra_groups = $default_internal_group

}

service imap-hibernate {
  unix_listener imap-hibernate {
    mode = 0660
    group = $default_internal_group
  }
}

service managesieve-login {
# Maximum number of connections allowed per each login process. This setting
# is used only if login_process_per_connection=no. Once the limit is reached,
# the process notifies master so that it can create a new login process.
  client_limit = 500
# Maximum number of login processes to create. The listening process count
# usually stays at login_processes_count, but when multiple users start logging
# in at the same time more extra processes are created. To prevent fork-bombing
# we check only once in a second if new processes should be created - if all
# of them are used at the time, we double their amount until the limit set by
# this setting is reached.
    process_limit = 50
# Number of login processes to keep for listening new connections.
    process_min_avail = 5
# Should each login be processed in its own process (yes), or should one
# login process be allowed to process multiple connections (no)? Yes is more
# secure, espcially with SSL/TLS enabled. No is faster since there's no need
# to create processes all the time.
    service_count = 0
# Set max. process size in megabytes. If you don't use
# login_process_per_connection you might need to grow this.
    vsz_limit = 128 M
# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
    #drop_priv_before_exec =
# chroot login process to the login_dir. Only reason not to do this is if you
# wish to run the whole Dovecot without roots. <doc/wiki/Rootless.txt>
#chroot = yes
# User to use for the login process. Create a completely new user for this,
# and don't use it anywhere else. The user must also belong to a group where
# only it has access, it's used to control access for authentication process.
# Note that this user is NOT used to access mails. <doc/wiki/UserIds.txt>
#user = dovecot

}

service managesieve {
# Maximum number of running mail processes. When this limit is reached,
# new users aren't allowed to log in.
    process_limit = 1024
# Set max. process size in megabytes. Most of the memory goes to mmap()ing
# files, so it shouldn't harm much even if this limit is set pretty high.
    vsz_limit = 512 M
# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
    #drop_priv_before_exec =
}

service pop3-login {
# Maximum number of connections allowed per each login process. This setting
# is used only if login_process_per_connection=no. Once the limit is reached,
# the process notifies master so that it can create a new login process.
  client_limit = 500
# Maximum number of login processes to create. The listening process count
# usually stays at login_processes_count, but when multiple users start logging
# in at the same time more extra processes are created. To prevent fork-bombing
# we check only once in a second if new processes should be created - if all
# of them are used at the time, we double their amount until the limit set by
# this setting is reached.
    process_limit = 50
# Number of login processes to keep for listening new connections.
    process_min_avail = 5
# Should each login be processed in its own process (yes), or should one
# login process be allowed to process multiple connections (no)? Yes is more
# secure, espcially with SSL/TLS enabled. No is faster since there's no need
# to create processes all the time.
    service_count = 0
# Set max. process size in megabytes. If you don't use
# login_process_per_connection you might need to grow this.
    vsz_limit = 128 M
# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
    #drop_priv_before_exec =
# chroot login process to the login_dir. Only reason not to do this is if you
# wish to run the whole Dovecot without roots. <doc/wiki/Rootless.txt>
#chroot = yes
# User to use for the login process. Create a completely new user for this,
# and don't use it anywhere else. The user must also belong to a group where
# only it has access, it's used to control access for authentication process.
# Note that this user is NOT used to access mails. <doc/wiki/UserIds.txt>
#user = dovecot
# IP or host address where to listen in for non-SSL connections. Defaults
# to above if not specified.
    inet_listener pop3 {
      address = *
    }
# IP or host address where to listen in for SSL connections. Defaults
# to above if not specified.
    inet_listener pop3s {
      address = *
    }
}

service pop3 {
# Maximum number of running mail processes. When this limit is reached,
# new users aren't allowed to log in.
    process_limit = 1024
# Set max. process size in megabytes. Most of the memory goes to mmap()ing
# files, so it shouldn't harm much even if this limit is set pretty high.
    vsz_limit = 512 M
# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
    #drop_priv_before_exec =

}

# Should all processes be killed when Dovecot master process shuts down.
# Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is e.g. because of a security fix).
#shutdown_clients = yes

# If non-zero, run mail commands via this many connections to doveadm server,
# instead of running them directly in the same process.
#doveadm_worker_count = 0
# UNIX socket or host:port used for connecting to doveadm server
#doveadm_socket_path = doveadm-server

# Space separated list of environment variables that are preserved on Dovecot
# startup and passed down to all of its child processes. You can also give
# key=value pairs to always set specific settings.
#import_environment = TZ

##
## Dictionary server settings
##

# Dictionary can be used to store key=value lists. This is used by several
# plugins. The dictionary can be accessed either directly or though a
# dictionary server. The following dict block maps dictionary names to URIs
# when the server is used. These can then be referenced using URIs in format
# "proxy::<name>".

plugin {
  # Here you can give some extra environment variables to mail processes.
  # This is mostly meant for passing parameters to plugins. %variable
  # expansion is done for all values.

# Quota plugin. Multiple backends are supported:
  #   dirsize: Find and sum all the files found from mail directory.
  #            Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
  #   dict: Keep quota stored in dictionary (eg. SQL)
  #   maildir: Maildir++ quota
  #   fs: Read-only support for filesystem quota
  #
  # Quota limits are set using "quota_rule" parameters, either in here or in
  # userdb. It's also possible to give mailbox-specific limits, for example:
  #   quota_rule = *:storage=1048576
  #   quota_rule2 = Trash:storage=102400
  # User has now 1GB quota, but when saving to Trash mailbox the user gets
  # additional 100MB.
  #
  # Multiple quota roots are also possible, for example:
  #   quota = dict:user::proxy::quota
  #   quota2 = dict:domain:%d:proxy::quota_domain
  #   quota_rule = *:storage=102400
  #   quota2_rule = *:storage=1048576
  # Gives each user their own 100MB quota and one shared 1GB quota within
  # the domain.
  #
  # You can execute a given command when user exceeds a specified quota limit.
  # Each quota root has separate limits. Only the command for the first
  # exceeded limit is excecuted, so put the highest limit first.
  # Note that % needs to be escaped as %%, otherwise "% " expands to empty.
  #   quota_warning = storage=95%% /usr/local/bin/quota-warning.sh 95
  #   quota_warning2 = storage=80%% /usr/local/bin/quota-warning.sh 80

quota_exceeded_message = "Mailbox is full / Blocks limit exceeded / Inode limit exceeded"

# ACL plugin. vfile backend reads ACLs from "dovecot-acl" file from maildir
  # directory. You can also optionally give a global ACL directory path where
  # ACLs are applied to all users' mailboxes. The global ACL directory contains
  # one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter
  # specifies how many seconds to wait between stat()ing dovecot-acl file
  # to see if it changed.
  acl = vfile:cache_secs=86400

# To let users LIST mailboxes shared by other users, Dovecot needs a
  # shared mailbox dictionary. For example:
  #acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes

# Convert plugin. If set, specifies the source storage path which is
  # converted to destination storage (mail_location) when the user logs in.
  # The existing mail directory is renamed to <dir>-converted.
  #convert_mail = mbox:%h/mail
  # Skip mailboxes which we can't open successfully instead of aborting.
  #convert_skip_broken_mailboxes = no
  # Skip directories beginning with '.'
  #convert_skip_dotdirs = no
  # If source storage has mailbox names with destination storage's hierarchy
  # separators, replace them with this character.
  #convert_alt_hierarchy_char = _

# Trash plugin. When saving a message would make user go over quota, this
  # plugin automatically deletes the oldest mails from configured mailboxes
  # until the message can be saved within quota limits. The configuration file
  # is a text file where each line is in format: <priority> <mailbox name>
  # Mails are first deleted in lowest -> highest priority number order
  #trash = /etc/dovecot-trash.conf

# Expire plugin. Mails are expunged from mailboxes after being there the
  # configurable time. The first expiration date for each mailbox is stored in
  # a dictionary so it can be quickly determined which mailboxes contain
  # expired mails. The actual expunging is done in a nightly cronjob, which
  # you must set up:
  #   dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool
  #expire = Trash 7 Spam 30
  #expire_dict = db:/var/lib/dovecot/expire.db

# Lazy expunge plugin. Currently works only with maildirs. When a user
  # expunges mails, the mails are moved to a mailbox in another namespace
  # (1st). When a mailbox is deleted, the mailbox is moved to another namespace
  # (2nd) as well. Also if the deleted mailbox had any expunged messages,
  # they're moved to a 3rd namespace. The mails won't be counted in quota,
  # and they're not deleted automatically (use a cronjob or something).
  #lazy_expunge = .EXPUNGED/ .DELETED/ .DELETED/.EXPUNGED/
}

System Information
*ReClick For Close
File : BlackDragon /wp-includes/Requests/src/test.php

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2024-12-23 03:31:45
..	dir	-	root/root	0755	2024-12-24 06:47:11
ssl	dir	-	root/root	0755	2024-04-12 02:20:07
auth_policy.conf		101 B	root/root	0640	2024-09-19 02:46:43
dh.pem	text/plain	424 B	root/root	0644	2023-06-28 09:51:36
dovecot.conf	text/x-c++	50.18 KB	root/root	0644	2024-09-19 02:46:42
ffdhe2048.pem	text/plain	424 B	root/root	0644	2024-08-20 05:14:45
ffdhe3072.pem	text/plain	603 B	root/root	0644	2024-08-20 05:14:45
ffdhe4096.pem	text/plain	769 B	root/root	0644	2024-08-20 05:14:45
sni.conf		261.7 KB	root/root	0640	2024-12-23 03:31:45
ssl.conf		2.74 KB	root/root	0640	2024-09-19 02:46:43